For the Small, Medium, & XL Packs be
sure that the end containing the indicator card is on the bottom so that the active ingredients rest on the
indicator card.
Examine the indicator from time to time. When the indicator changes from blue to pink, follow the reactivation
instructions below. (Reactivation instructions are also printed on each unit.)
How to Reactivate Your Dehumidifying unit
Reactivation times
below are minimums. Sometimes, when the silica gel becomes overly saturated, it's good practice to extend the reactivation
period. However, do not vary from the recommended temperatures.
Mini Canister
When the blue silica gel beneath the inspection window turns pink, reactivate as follows:
Place the unit in a vented 300 degree F oven for at least 3 hours (or until the silica gel turns blue again).
Large Canister
When
the blue silica gel beneath the heat-resistant inspection window turns pink, reactivate as follows: Do not remove the
cap with the inspection window. Place the entire unit (do not disassemble) in a vented
325 degree F oven for at least 3 hours. The silica gel will gradually turn blue again. Instructions can be found on the base
of the canister.
Small, Medium, & XL Packs
Place the unit with the indicator card down, occasionally examining the card. When the center circle turns pink
reactivate the unit as follows: Remove the bag of silica gel granules from the unit and place the bag in a vented 240 degree
F oven for at least 3 hours. Replace the bag in the unit. Please note that it may take several hours for the indicating circles
to turn blue again.
After reactivation is complete
and the unit is cool enough to handle, return the unit to the enclosed space you wish to protect immediately. If you leave
the unit in the open it will rapidly adsorb moisture from the surrounding air.
